- Accueil de LUCK
- Author profile
Anthonin DEMARBAIX
Prénom
AnthoninNom
DEMARBAIXLangues
frListe des publications de l’auteur
Voici les éléments 21-30 de 35
- Sort Options:
- Date and Type
- Title Asc
- Title Desc
- Issue Date Asc
- Issue Date Desc
- Type Asc
- Type Desc
- Results Per Page:
- 5
- 10
- 20
- 40
- 60
- 80
- 100
- Sort Options:
- Date and Type
- Title Asc
- Title Desc
- Issue Date Asc
- Issue Date Desc
- Type Asc
- Type Desc
- Results Per Page:
- 5
- 10
- 20
- 40
- 60
- 80
- 100
Green Ceramic Machining: Determination of the Recommended Feed Rate for Y-TZP Milling
01 septembre 2021, DEMARBAIX, Anthonin
; Mulliez, Marylou; Rivière-Lorphèvre, Edouard; Spitaels, Laurent; Duterte, Charles; Petit, Fabrice; Ducobu, François,
- HE Condorcet
,
- Article scientifique
Article scientifique
Abstract : "Manufacturing of advanced ceramic parts exhibiting complex geometries is laborious and expensive. Traditionally, the machining is carried out on a so-called ‘green ceramic’: a compact composed of ceramic powder held with the help of a binder. This difficulty is due not only to the composition of the material, but also to the lack of methods that determine optimal machining parameters. ...
Green Ceramic Machining: Influence of the Cutting Speed and the Binder Percentage on the Y-TZP Behavior
21 mai 2020, DEMARBAIX, Anthonin
; Ducobu, François; Preux, Nicolas; Petit, Fabrice; Rivière-Lorphèvre, Edouard,
- HE Condorcet
,
- Article scientifique
Article scientifique
Abstract : "The demand for inert bioceramics is always increasing in the dental field. Yttrium oxide tetragonal zirconia polycrystals (Y-TZP) are oxide ceramics which are currently used because of their interesting mechanical properties due to a toughening transformation. Industrially speaking, machining of the ceramic before sintering (green body) is very common because it allows a better productivity ...
Impact of Green Ceramic Hybrid Machining (GCHM) on Reliability and Repeatability of the Properties of Sintered Yttrium-Tetragonal Zirconia Polycrystal Parts
20 juin 2023, Ducobu, François; DEMARBAIX, Anthonin
; Rivière-Lorphèvre, Edouard; Spitaels, Laurent; Petit, Fabrice; Preux, Nicolas; Duterte, Charles; Mulliez, Marylou; Lauwers, Bert,
- HE Condorcet
,
- Article scientifique
Article scientifique
Abstract : "The innovative Green Ceramic Hybrid Machining (GCHM) process sequentially combines
milling with a cutting tool (GCM, Green Ceramic Machining) and laser beam machining (GCLBM) of
a ceramic material (black Y-TZP in this study) at the green stage mainly to increase productivity, avoid
taper angle limitations of laser beam machining, and obtain micro-features. The study focuses on ...
Influence of Conventional Machining on Chemical Finishing of Ti6Al4V Electron Beam Melting Parts
26 avril 2020, Spitaels, Laurent; Ducobu, François; DEMARBAIX, Anthonin
; Rivière-Lorphèvre, Edouard; Dehombreux, Pierre,
- HE Condorcet
,
- Acte de conférence ou de colloque
Acte de conférence ou de colloque
"Additive manufacturing is feeding great hopes for future developments in fields such as aeronautical, biomedical and rapid tooling industrssssies. However, limitations are still restricting its use to make prototypes and hampering mass production. In the case of titanium alloy printing (e.g. Ti6Al4V) with the EBM (Electron Beam Melting) process, the major obstacle to use parts directly after printing ...
Infrared Thermography (IRT) Applications for Non-Destructive Inspection of Composite Parts Obtained by Continuous Fiber Additive Manufacturing: Influence of Heating Parameters on Defect Detection
02 décembre 2024, Barros, Camila; Notebaert, Arnaud; Cunha, Sebastião Simões Jr.; DEMARBAIX, Anthonin
,
- HE Condorcet
,
- Article scientifique
Article scientifique
Article presented at the first International Conference on Industrial, Manufacturing, and Process Engineering (ICIMP-2024), Regina, Canada, 27–29 June 2024.
Abstract:
"This paper investigates active thermography models for non-destructive testing of composites, with a focus on continuous carbon fiber reinforced thermoplastic polymer (CCFRTP) components, in order to detect flaws such as porosity ...
Investigating Defect Detection in Advanced Ceramic Additive Manufacturing Using Active Thermography
15 novembre 2024, DEMARBAIX, Anthonin
; Juste, Enrique; Verlaine, Tim; Strazzeri, Ilario; Quinten, Julien; Notebaert, Arnaud,
- HE Condorcet
,
- Article scientifique
Article scientifique
Abstract: "Additive manufacturing of advanced materials has become widespread, encompassing a range of materials including thermoplastics, metals, and ceramics. For the ceramics, the complete production process typically involves indirect additive manufacturing, where the green ceramic part undergoes debinding and sintering to achieve its final mechanical and thermal properties. To avoid unnecessary ...
Investigation into Influence of Tensile Properties When Varying Print Settings of 3D-Printed Polylactic Acid Parts: Numerical Model and Validation
08 août 2024, Homrani, Khalil; Volcher, Steven; Riviere Lorphèvre, Edouard; DEMARBAIX, Anthonin
; Odent, Jérémy; Lorenzoni, Margaux; Spitaels, Laurent; Ducobu, François,
- HE Condorcet
,
- Article scientifique
Article scientifique
Abstract en anglais : "Material Extrusion (MEX), particularly Fused Filament Fabrication (FFF), is the most widespread among the additive manufacturing (AM) technologies. To further its development, understanding the influence of the various printing parameters on the manufactured parts is required.
The effects of varying the infill percentage, the number of layers of the top and bottom surfaces ...
Numerical Modelling of the Heat Source and the Thermal Response of an Additively Manufactured Composite during an Active Thermographic Inspection
19 décembre 2023, Notebaert, Arnaud; Quinten, Julien; Moonens, Marc; Oldez, Vedi; Barros, Camila; Cunha, Sebastião Simões Jr.; DEMARBAIX, Anthonin
,
- HE Condorcet
,
- Article scientifique
Article scientifique
Abstract : "This paper deals with the numerical modelling of non-destructive testing of composite parts using active thermography. This method has emerged as a new approach for performing non-destructive testing (NDT) on continuous carbon fibre reinforced thermoplastic polymer (CCFRTP) components, particularly in view of detecting porosity or delamination. In this context, our numerical model has ...
On the use of the artificial neural network to determine heating parameters for active thermography in composites, a feasibility study
30 avril 2025, Airson, Aymeric; DEMARBAIX, Anthonin
; Notebaert, Arnaud; Barros, C.; Gomes, G.F.; Cunha Jr., S.S.,
- HE Condorcet
,
- Article scientifique
Article scientifique
Abstract : "This study aims to design an Artificial Neural Network (ANN) able to provide its user, in a numerical and experimental context, with a combination of heating parameters in an active thermography process. This combination allowing the user to reliably detect a known in size and depth delamination, which is one of the most important sources of damages in composite structures. This work ...
Powder heating temperature, laser power and layer height in SLS 3D printing: impact on physical and mechanical properties of polyamide 12 parts
17 novembre 2025, Jabri, Fatima-Ezzahrae; Ouballouch, Aissa; El Maguiri, Mohamed Nawfal; Essoussi, Hamza; Lasri, Larbi; DEMARBAIX, Anthonin
; El Alaiji, Rachid,
- HE Condorcet
,
- Article scientifique
Article scientifique
Abstract : "In this paper, physical and compression properties of 3D printed polyamide 12 (PA12) cylindrical parts are evaluated, and the impact of process parameters on these properties was analyzed. Within these parameters, a novel parameter is studied, powder heating temperature before printing, in order to examine its indirect effect on 3D parts. Firstly, compression samples were prepared by ...