Parcourir HE Condorcet par type de document "Acte de conférence ou de colloque"
Voici les éléments 1-20 de 24
-
Autonomous Virtual Reality Integration for Active Thermography : Engineering Education and Experimentation
03 septembre 2205, Strazzeri, Ilario; Notebaert, Arnaud; Smets, Florian; Barros, Camila; Quinten, Julien; DEMARBAIX, Anthonin
, HE Condorcet
Acte de conférence ou de colloqueInternational Conference, XR Salento 2025, Otranto, Italy, June 17–20 2025 Abstract : "The present study sets out the development and evaluation of an autonomous virtual reality (VR) environment designed to enhance the teaching and experimentation of active thermography in engineering education. This paper builds upon a previous version (VR_1), the limitations of which were revealed to be related ... -
Binder influence on green ceramic machining by means of milling and laser machining
06 septembre 2021, DEMARBAIX, Anthonin; Ducobu, François; Preux, Nicolas; Petit, Fabrice; Rivière-Lorphèvre, Edouard, HE Condorcet
Acte de conférence ou de colloque"The micro manufacturing of ceramic components is technologically challenging especially when complex shapes and micro features are required. A hybrid manufacturing chain is developed for non-sintered(green) blanks machined using sequentially a cutting tool and a laser source. During the preparation of the green blank, a binder is added to the powder to improve compaction. The amount of binder can ... -
Calibration method of hybrid machining process in the green ceramic combining micro-milling and laser machining
2019, DEMARBAIX, Anthonin; Rivière-Lorphèvre, Edouard; Ducobu, François; Dolimont, Adrien; Petit, Fabrice; Juste, Enrique, HE Condorcet
Acte de conférence ou de colloqueContribution to "euspen’s 19th International Conference & Exhibition, Bilbao, ES, June 2019" Abstract : "The requirements for quality amelioration of engineered products are increasingly stringent, and specially when the miniaturization and difficult-to-machine materials are considered. The development of hybrid machining processes (HMPs) answers this problem. Indeed, HMPs are variants of ... -
The CDIO approach in a FabLab activity for engineering education promotion
Acte de conférence ou de colloqueAbstract : "The number of FabLabs has been steadily increasing over the last few years. Their main objectives are to sensitize its public on Science, Technology, Engineering, and Math (STEM) education through the digital manufacturing chain of an object and to allow the large public to make their own objects. Through, the increasing popularization of these advanced technologies, it becomes more ... -
Chemical etching as a finishing process for electron beam melting (EBM) parts
02 juillet 2019, Dolimont, Adrien; DEMARBAIX, Anthonin; Ducobu, François; Rivière-Lorphèvre, Edouard, HE Condorcet
Acte de conférence ou de colloque"The goal of this research is to analyze the impact of chemical etching on parts produced by electron beam melting. Given that the surface conditions are poor (Ra between 25 to 35 µm), an enhancement of these is asked. Dimensional and surface measurements were realized on conceived parts. Different exposure times were tested. The impact of these times on surface quality was evaluated. To help ... -
Design of experiment on smart materials: tensile test on 3D printed composites reinforced with continuous carbon fiber and resistivity detection
05 juillet 2025, Ochana, Imi; Ducobu, François; Homrani, Mohamed Khalil; DEMARBAIX, Anthonin, HE Condorcet
Acte de conférence ou de colloqueDans le cadre de la 28e "International ESAFORM Conference on Material forming", du 7 au 9 mai 2025 à Paestum en Italie. Abstract : "Structural Health Monitoring (SHM) refers to the process of continuously assessing the condition of materials and structures to detect damage, degradation, or performance changes over time. It uses sensors integrated into materials to monitor their behavior, enabling ... -
Development of a novel benchmark artifact for Additive Manufacturing processes
10 juin 2021, Spitaels, Laurent; Rivière-Lorphèvre, Edouard; DEMARBAIX, Anthonin; Ducobu, François, HE Condorcet
Acte de conférence ou de colloque" This article aims to make a review of the existing benchmark artifacts and to summarize the main requirements chosen by authors. From this state of the art, a new benchmark artifact is proposed by adapting an existing one to fulfil its missing characteristics. Measurements possibilities in terms of dimensions are enumerated and organized using ISO 286 dimensional intervals as presented in the ... -
Development of the hybrid sequential machining: laser machining and milling
2016, DEMARBAIX, Anthonin; Rivière-Lorphèvre, Edouard; Ducobu, François; Filippi, Enrico; Petit, Fabrice; Preux, Nicolas, HE Condorcet
Acte de conférence ou de colloque"The aims of this paper is to study the advantages and disadvantages of laser micro-machining and the micro-milling. The final goal is to couple these processes in the same structure. The sequential hybrid process is subtractive-subtractive it combines the laser u-machining and the u-milling. The samples are machined with the two processes to compare the dimensional tolerance and the geometrical ... -
Dimensional and geometrical performance assessment of two FDM printers using a benchmark artifact
03 juin 2022, Spitaels, Laurent; Rivière-Lorphèvre, Edouard; DEMARBAIX, Anthonin; Thielens, Vincent; Ducobu, François, HE Condorcet
Acte de conférence ou de colloque"In this article, dimensional and geometrical performances of two Fused Deposition Modelling (FDM) printers with Cartesian architecture (Ultimaker S3 and Intamsys FUNMAT HT) are compared using an original benchmark artifact design. Five parts were printed on each printer in ABS. Five other parts were also produced with the Ultimaker S3 in PLA to show the influence of material choice on the printer’s ... -
EEG-based brain-computer interface for alpha speed control of a small robot using the MUSE headband
28 septembre 2020, HE CondorcetActe de conférence ou de colloqueNon-invasive BMI applications are increasingly used in different contexts ranging from industrial, clinical and gaming. After having tested the difference between a classical EEG recorder with electroconductive gel (ANT system) and the MUSE EEG headband, we studied the BCI performances of the later during the control of a small robot. We demonstrated that the participants were able to successfully ... -
Efecto de oligosacarinas derivadas de plantas y hongos sobre la morfología, contenido y alteración de biomoléculas en plantas de Nicotiana tabacum bajo condiciones de estrés salino
juin 2016, CARAHActe de conférence ou de colloquePoster d'une présentation de juin 2016 à l'occasion de "Red Bio Perú 2016" -
État des lieux de l’activité biologique des sols viticoles belges : impact des pratiques culturales et du contexte pédologique
2024, HE CondorcetActe de conférence ou de colloqueArticle présenté le 16 mars 2023 dans le cadre de la 8e Journée de la Recherche en Haute Ecole. Disponible de la page 99 à la page 115. Extrait du résumé : L’impact de la viticulture sur l’activité biologique des sols est encore peu étudié à l’heure actuelle. Cette étude s’inscrit dans un contexte d’intérêt croissant pour la caractérisation de la vie des sols en agriculture et d’expansion rapide ... -
Finite element modelling of the Taylor impact test in 3D with the Coupled Eulerian-Lagrangian method
Acte de conférence ou de colloqueContribution to ESAFORM2021. Abstract : "When modelling a cutting operation, the constitutive model of the machined material is one of the key parameters to obtain accurate and realistic results. Up to now, the Johnson-Cook model is still the most used, even if an increasing number of models, such as the Hyperbolic TANgent (TANH) model, were introduced last years to overcome its limitations and ... -
Framework for determining and simulating tensile properties of smart composite FDM printed parts
07 mai 2025, Homrani, Mohamed Khalil; DEMARBAIX, Anthonin; Ochana, Imi; Ducobu, François, HE Condorcet
Acte de conférence ou de colloqueAbstract : "Fused deposition modeling (FDM) is an additive manufacturing technique with good precision and moderate tolerances. Utilizing Finite Element Analysis (FEA) in literature is now key to studying the properties of these printed parts. The nature of the FDM process results in anisotropic inner structures with microscopic voids that are heavily affected by printing parameters. Even more so ... -
The Hybrid Machining of Ceramic: The choice of production stage
30 mai 2017, DEMARBAIX, Anthonin; Rivière-Lorphèvre, Edouard; Ducobu, François; Filippi, Enrico; Preux, Nicolas, HE Condorcet
Acte de conférence ou de colloqueContribution to "Euspen’s 17th International Conference & Exhibition, Hannover, DE, May 2017". Abstract : "The demand for micro products has increased gradually since last decades in various areas, requiring the development of micro manufacturing processes. Micro manufacturing is characterized by the size of functional features (smaller than 10 um), a high precision, a good surface finishing and ... -
Influence of Conventional Machining on Chemical Finishing of Ti6Al4V Electron Beam Melting Parts
26 avril 2020, Spitaels, Laurent; Ducobu, François; DEMARBAIX, Anthonin; Rivière-Lorphèvre, Edouard; Dehombreux, Pierre, HE Condorcet
Acte de conférence ou de colloque"Additive manufacturing is feeding great hopes for future developments in fields such as aeronautical, biomedical and rapid tooling industrssssies. However, limitations are still restricting its use to make prototypes and hampering mass production. In the case of titanium alloy printing (e.g. Ti6Al4V) with the EBM (Electron Beam Melting) process, the major obstacle to use parts directly after printing ... -
La musique au cœur du soutien à la parentalité
26 septembre 2025, HE CondorcetActe de conférence ou de colloquePoster exposé à l'occasion du congrès scientifique international francophone dédié à la logopédie/orthophonie, les 26 et 27 septembre 2025 à Mons. -
A new manufacturing chain for ceramic shaping: sequential combination of milling and laser machining in green ceramic
juin 2020, DEMARBAIX, Anthonin; Ducobu, François; Petit, François; Rivière-Lorphèvre, Edouard, HE Condorcet
Acte de conférence ou de colloqueContribution to euspen’s 20th International Conference & Exhibition (Geneva, CH, June 2020) Abstract : "The ceramic microcomponents have very interesting mechanical and thermal properties in an extreme environment such as a high temperature, a corrosive environment, etc. Unfortunately, the principal limitation of ceramic material usage is its shaping because of the brittlness of the material. ... -
Réflexion épistémologique sur la recherche inter-Hautes Écoles autour de la "maîtrise de la langue française"
2022, HE CondorcetActe de conférence ou de colloqueArticle présenté le 25 février 2021 à l'occasion de la Journée des chercheurs en Haute Ecole de 2020-21. Il est disponible de la page 118 à la page 134. Résumé : Dans l’enseignement supérieur en Belgique francophone, nombreux sont les enseignants et les chercheurs à débattre autour de la (non) maîtrise de la langue française par les étudiants, mais aussi à se poser la question de l’efficacité des ... -
Using Biostimulants to Enhance Plant Tolerance to Abiotic Stresses
26 mars 2017, CARAHActe de conférence ou de colloquePoster présenté en mars 2017 à l'occasion de la 2ème "Agriculture and Climate Change Conference"